How to make poster frame

how to make poster frame

Create a poster frame: A Step-By-Step Guide


Creating your poster frame can be a satisfying do-it-yourself project. With the right materials, patience, and creativity, you can craft a unique frame to highlight your favourite posters. This guide will lead you through each process step, from gathering materials to the final touches.


Step 1: How to make poster frame, Gather Your Materials


Before you start, gather all the necessary materials. You will need:


  • Your chosen poster
  • Two lengths of moulding
  • A sheet of acrylic or glass for the front
  • A sheet of foam board for the back
  • A measuring tape
  • A mitre box and saw
  • Sandpaper
  • Glue or a heavy-duty adhesive
  • Clamp or heavy objects for applying pressure
  • Hanging hardware


Make sure your moulding is long enough to frame your artwork. The foam board and acrylic or glass should match the size of your poster.


Step 2: Creating a poster frame, Measure Twice, Cut Once


Measure the dimensions of your poster and add an extra inch on each side for the frame. Use the mitre box and saw to cut your moulding into four pieces, each with a 45-degree angle at both ends.


Step 3: Assemble the Frame


Arrange your four pieces of moulding on a flat surface to form a frame, ensuring the angles line up perfectly. Apply glue to the mitred corners and press them together. Use clamps or heavy objects to keep the corners tight as the glue dries. Check the frame with a level to make sure it's straight.


Step 4: Sand and Finish


Once the glue has fully dried, use sandpaper to smooth out any rough or uneven edges on the frame. At this point, you can stain or paint your frame or leave it in its natural state. Apply your chosen finish and let it dry completely.


Step 5: Insert the Poster


Place your glass or acrylic sheet into the frame, followed by the poster and the foam board backing. If the fit is snug, you may not need any additional fasteners. If not, secure the poster and back to the frame using small nails or clips.


Step 6: Attach the Hanging Hardware


On the back of the frame, measure and mark where you want to attach your hanging hardware. Attach the hardware as instructed by the manufacturer. Make sure it's secure and can support the weight of your framed poster.


In summary: How to make poster frame


Now that you've made your poster frame, it's time to display your masterpiece! Hang your poster on the wall, making sure it's level. Stand back and admire your handiwork.



In conclusion, making your poster frame is manageable and rewarding. Following these steps, you can create a custom frame that complements your poster and suits your style. Whether you're framing movie posters, art prints, or personal photos, you'll be able to appreciate your framed pieces even more knowing you crafted the frames yourself.