How to frame plywood art
How to Frame Plywood Art: A Step-by-Step Guide
How to frame plywood art? Framing artwork can enhance its aesthetic value and protect it from damage. While there are several materials, plywood is a popular option due to its durability and affordability. However, framing plywood art requires a different approach than traditional canvas or paper pieces. This article will discuss how to frame plywood art in a few simple steps.
Materials Needed:
- Plywood artwork
- The frame (pre-made or custom)
- Mat board (optional)
- Measuring tape
- Pencil
- Straight edge or ruler
- Saw or box cutter
- Sandpaper
- Wood glue
- Nails or screws
- Picture hanging hardware
Step 1: Measure the Artwork
Measure the length and width of the plywood artwork, and add an extra half inch to each dimension to ensure a snug fit inside the frame. If using a mat board, measure its dimensions as well.
Step 2: Choose a Frame
Select a frame that fits the measurements of the artwork and mat board, if applicable. Pre-made frames are readily available at most art supply stores, but you can also have one custom-made to your specifications.
Step 3: Cut the Plywood
Cut the plywood using a saw or box cutter to fit the frame's dimensions. Sand the edges with sandpaper to smooth any roughness.
Step 4: Attach the Artwork to the Plywood
Apply wood glue to the back of the artwork and carefully place it onto the plywood. Use a straight edge or ruler to ensure the artwork is appropriately aligned and centred.
Step 5: Secure the Plywood to the Frame
Attach the plywood to the frame using nails or screws. Make sure the artwork is centred and level within the frame. Place a mat board on top of the artwork and secure it to the frame. This is an important step in how to frame plywood art.
Step 6: Add Hanging Hardware
Attach picture hanging hardware to the back of the frame, following the manufacturer's instructions. Choose hardware that can support the weight of the artwork.
Conclusion on how to frame wood panel art
Framing plywood art is a simple process that can enhance its beauty and protect it from damage. You can create a stunning display for your plywood artwork by following these easy steps. Remember to measure carefully, choose suitable materials, and take your time to ensure a quality finished product.